I used to have an Alfa Romeo 156 TS, but it was rear-ended one wet Saturday morning on the Tamar Bridge, shortly after I'd fitted a set of TSW Evo R rims. The car was written off (bent boot floor – but you should have seen the Escort that hit me!) but I kept the wheels for my next Alfa. Well, that never happened, and the wheels have just sat. Did some digging today and it looks like I'll be using them on my newly-acquired A2 TDI. The rims have the Alfa PCD of 5 x 98, as opposed to the A2's 5 x 100, so will easily fit using a set of TUV-approved adaptor ('wobble') bolts. The TSWs have a stock 'universal' centre bore of 72.6mm, so have bought some spigot rings to match the A2's 57.1mm hub. The ET is 34mm, the rim's size 7Jx16 – the same dimensions as the A1's 16in rims, which I know fit the A2. So, just need to buy some tyres now (once I've done a double-check 'practice' mount). Choices: do I go for 195/50, 205/45 or....???