Media added by humps

Front support beam bent by tow bar

Front support beam bent by tow bar

  • 0
  • 0
Front support beam bent by tow bar

Front support beam bent by tow bar

  • 0
  • 0
5L 10cylinders

5L 10cylinders

  • 0
  • 0
cracked air filter housing

cracked air filter housing

  • 0
  • 0
white winter boots

white winter boots

  • 0
  • 0
bodykit jack hole cover

bodykit jack hole cover

  • 0
  • 0
auditt v alditt

auditt v alditt

  • 0
  • 0
Front without dash

Front without dash

  • 2
  • 0
the back of the vent housing

the back of the vent housing

  • 0
  • 0
side view

side view

  • 0
  • 1
mounted with phone

mounted with phone

  • 0
  • 0
mounted with no phone

mounted with no phone

  • 0
  • 0
Headunit is out, two screws to remove. Then unclip the vent housing, slowly.

Headunit is out, two screws to remove. Then unclip the vent housing, slowly.

  • 0
  • 0
Magnet holding force test, 140g. Standard iPhone 3GS covered with protective film

Magnet holding force test, 140g. Standard iPhone 3GS covered with protective film

  • 0
  • 2
Magnet holding force test, 450g. Enough to hold iPhone 3GS under 3g load!

Magnet holding force test, 450g. Enough to hold iPhone 3GS under 3g load!

  • 0
  • 0
left, plain plated finish. Right, double sided tape

left, plain plated finish. Right, double sided tape

  • 0
  • 0
Maxi Cosi easyfix base

Maxi Cosi easyfix base

  • 0
  • 0
P1010593

P1010593

  • 0
  • 0
Focus S-Line fail

Focus S-Line fail

  • 0
  • 0
HUD not very good

HUD not very good

  • 0
  • 0
That G263 sensor

That G263 sensor

  • 0
  • 0
SNV31736 small

SNV31736 small

  • 0
  • 0
SNV31738 small

SNV31738 small

  • 0
  • 0
SNV31742 mid

SNV31742 mid

  • 0
  • 0
Back
Top