ecoangel
Well-Known Member
A2 stranded! - Any ideas from VAGCOM experts?
Hi All!
Was hoping to take family away for Easter but have had gearbox trouble!
There was some leakage from the G40 gear controller so I took it out and cleaned up and checked gaskets and pipes.
All back together ready for basic gearbox setting.
But my VAGCOM crashed part way through and ever since then with Hydraulics on the Measuring block for Gearbox filed 002, is not 1.9V but 3.93V - so the J514 controller is in emergency mode.
I tried to release the hydraulic pressure and reset Clutch cable Volts back to 1.9V. Fine until hydraulics start up again.
How do i interrogate and erase errors codes in the geabox comuter memory without and VAS 5051A? I just have VAGCOM and laptop! No error codes come up on my system.
Car will not start and we can't go on holiday!
Hope you all have a Happier Easter!
Hi All!
Was hoping to take family away for Easter but have had gearbox trouble!
There was some leakage from the G40 gear controller so I took it out and cleaned up and checked gaskets and pipes.
All back together ready for basic gearbox setting.
But my VAGCOM crashed part way through and ever since then with Hydraulics on the Measuring block for Gearbox filed 002, is not 1.9V but 3.93V - so the J514 controller is in emergency mode.
I tried to release the hydraulic pressure and reset Clutch cable Volts back to 1.9V. Fine until hydraulics start up again.
How do i interrogate and erase errors codes in the geabox comuter memory without and VAS 5051A? I just have VAGCOM and laptop! No error codes come up on my system.
Car will not start and we can't go on holiday!
Hope you all have a Happier Easter!
Last edited: