wilco184
Member of the year 2015
Hi all,
Has anyone experienced anything similar to the following?
In short, the airbag light is on and I'm getting two fault codes for 00588 (N95 steering wheel airbag high resistance - intermittent) and 00654 (N153 drivers seat belt tensioner high resistance - intermittent). As per the video here, the measuring blocks for these airbags (in fields 1 and 3) are constantly flicking between 'correct' and 'too high'.
I've tried a known working drivers steering wheel airbag and the result was the same. I've also removed the steering wheel and checked for loose connectors etc.
Please let me know if you can offer any advice. I'm not sure if the faults are pointing towards a wiring issue, an issue with the control module or a battery issue.
Many thanks,
Matt.
Has anyone experienced anything similar to the following?
In short, the airbag light is on and I'm getting two fault codes for 00588 (N95 steering wheel airbag high resistance - intermittent) and 00654 (N153 drivers seat belt tensioner high resistance - intermittent). As per the video here, the measuring blocks for these airbags (in fields 1 and 3) are constantly flicking between 'correct' and 'too high'.
I've tried a known working drivers steering wheel airbag and the result was the same. I've also removed the steering wheel and checked for loose connectors etc.
Please let me know if you can offer any advice. I'm not sure if the faults are pointing towards a wiring issue, an issue with the control module or a battery issue.
Many thanks,
Matt.