Another cruise question

[Indi]

1.6 FSI
CC-Stalk T10n Pin # <==> White Socket T10s Pin # (WireColor) <==> (1.6 FSI ECU Pin #)
2 <==> 3(Blue/Black) <==> (49)
3 <==> 6(Blue/Red) <==> (51)
4 <==> 2(White) <==> (55)
5 <==> 7(Black/Red) <==> (52)
7 <==> 2(White) <==> (55)
6 <==> Connect to ignition +12V (e.g. brake light switch pin #2 with wire color red/green)

Just thought I’d add here in case it helps anyone else, I am fitting cruise control to my FSI, and the colours of the wires running between the ECU and the white plug do not match up.

Mine instead are:
2 <==> 3(Blue/Red) <==> (49)
3 <==> 6(White) <==> (51)
4 <==> 2(Blue/Red) <==> (55)
5 <==> 7(Black/Brown) <==> (52)
7 <==> 2(Blue/Red) <==> (55)

I’m assuming that these are the correct pins, I have counted several times, and they seem to go to the correct pins of the white t10 connector.
(I will update in a few days if I fit it and these do not appear to be the right connections)

Photos below

The right most pin of the white block is ECU pin 44

The two Blue/Red wires in the on the right hand side are pins 2 and 3, the numbers just sent visible in the photo