Captain059
A2OC Donor
How hot?be careful, it gets hot in there.
- Bret
I am planning to put some electronics in there.
Thanks
How hot?be careful, it gets hot in there.
- Bret
For your information the towing eye screws in in the O/S fog light area. I have a sport with no fog lights and to gain acces to the anchor point you simply pop out the blanking plate where the fog lights could go. I imagine it is similiar for a car with fog lights.No the towline anchor is under the wheel bolt box spanner. I’ve never seen it but I imagine it is a hoop with a thread that screws into something at the front of the car. Can take a look tomorrow.
The disc in the towbar slot is a German to UK tow socket adaptor.
I would assume you see the wrong side of 60C. Depends a little on the ambient... I would definitively organise some form of forced ventilation.How hot?
I am planning to put some electronics in there.
Thanks
10mm definitely as it fits the battery terminals & possibly the engine cover on the diesels off the top of my head,I will use this old thread.
Is this spanner the factory open ended spanner in A2 toolkit?
Looks just like yours both in the car & the new tool kit I picked up.Thank you for your replies. If anyone has a chance to take a photo of the spanner I would appreciate it. Not urgent .
Isn’t this the extra collision protection to fill the void where the original satnav drive went?I removed my toolkit box this morning and to my surprise it is the R variant.
That leaves the G variant unaccounted for. I have found a picture of G on Audi tradition and it a wierd rectangular, looks closed, box. Does anybody know anything about this toolbox?
http://trshop.audi.de/konakart/SelectProd.do;jsessionid=F8DA96850021473EA1DA0AB0B7245FBF.tomcat01?prodId=12701&manufacturer=manufacturer&name=TOOL BOX&model=0001
Andy
Perfect, thx. So my toolkit is also complete .Looks just like yours both in the car & the new tool kit I picked up.
Not a picture but might help.Thank you for your replies. If anyone has a chance to take a photo of the spanner I would appreciate it. Not urgent .
Thanks for the suggestion but looking at AT again I have just noticed the reference to 'Balance Weight'.Isn’t this the extra collision protection to fill the void where the original sat above drive went?
Have you managed to check it? Can you post a photo? Thx.I would expect the genuine spanner to have the part number in the link. I will check mine tomorrow.
Sorry I forgot, I will do my best to try and remember tomorrow assuming I have s spanner.Have you managed to check it? Can you post a photo? Thx.
I'm sure one of our breakers can provide you with an owners manual. Put a wanted ad in the market place.Thanks everyone, I don't have the owners manual so the information is very useful. Ill start to put it all together.
Ian