Do we know this car? LY03 LZH

J

james.mckenzie

Member
Hello all,

Looking to get into an FSI - but its not listed on marketplace here! I know I know. Does anyone know of this car? @A2Steve @timmus @Ami

Anyway its just shy of 80k miles and has had the EML off and on for years. Does this lamp come on when regular fuel is used or only when sensors, flaps etc fail.

Many thanks.

James
 
Scan report

VCDS- Version: Release 1.2Saturday, 30 March 2024, 15:54:16:16664Chassis Type: 8Z - Audi A2Scan: 01,02,03,08,15,16,17,18,37,45,46,56,57,75,76,77-------------------------------------------------------------------------------Address 01: Engine Labels: NoneController: 036 906 013 FComponent: MED7.5.11 4628Coding: 00051Shop #: WSC 02154VCID: 125778534D77WAUZZZ8Z33N024558 AUZ7Z0B2277669No fault code found.Readiness: 1110 0101-------------------------------------------------------------------------------Address 03: ABS Brakes Labels: NoneController: 8Z0 907 379 DComponent: ESP FRONT MK60 0101Coding: 0007183Shop #: WSC 02154VCID: 49E59F3F60A1No fault code found.-------------------------------------------------------------------------------Address 08: Auto HVAC Labels: NoneController: 8Z0 820 043 FComponent: A2-KLIMAVOLLAUTOMAT 0514VCID: 3905EFFF3041No fault code found.-------------------------------------------------------------------------------Address 15: Airbags Labels: 8Z0-959-655.LBLController: 8Z0 959 655 EComponent: Airbag Front+Seite 5005Coding: 00102Shop #: WSC 02152VCID: 4EEFAC2399CFNo fault code found.-------------------------------------------------------------------------------Address 17: Instruments Labels: 8Z0-920-xxx-17.LBLController: 8Z0 920 950 PComponent: KOMBI+WEGFAHRS. VDO D04Coding: 04442Shop #: WSC 00001VCID: 4BE9A5376ADDWAUZZZ8Z33N024558 AUZ7Z0B2277669No fault code found.-------------------------------------------------------------------------------Address 45: Inter. Monitor Labels: 8E0-951-177.LBLController: 8Z0 951 177Component: Innenraumueberw. D04Coding: 00001Shop #: WSC 00000VCID: 55DD434FBC19No fault code foun
 
james.mckenzie said:
Scan report

VCDS- Version: Release 1.2Saturday, 30 March 2024, 15:54:16:16664Chassis Type: 8Z - Audi A2Scan: 01,02,03,08,15,16,17,18,37,45,46,56,57,75,76,77-------------------------------------------------------------------------------Address 01: Engine Labels: NoneController: 036 906 013 FComponent: MED7.5.11 4628Coding: 00051Shop #: WSC 02154VCID: 125778534D77WAUZZZ8Z33N024558 AUZ7Z0B2277669No fault code found.Readiness: 1110 0101-------------------------------------------------------------------------------Address 03: ABS Brakes Labels: NoneController: 8Z0 907 379 DComponent: ESP FRONT MK60 0101Coding: 0007183Shop #: WSC 02154VCID: 49E59F3F60A1No fault code found.-------------------------------------------------------------------------------Address 08: Auto HVAC Labels: NoneController: 8Z0 820 043 FComponent: A2-KLIMAVOLLAUTOMAT 0514VCID: 3905EFFF3041No fault code found.-------------------------------------------------------------------------------Address 15: Airbags Labels: 8Z0-959-655.LBLController: 8Z0 959 655 EComponent: Airbag Front+Seite 5005Coding: 00102Shop #: WSC 02152VCID: 4EEFAC2399CFNo fault code found.-------------------------------------------------------------------------------Address 17: Instruments Labels: 8Z0-920-xxx-17.LBLController: 8Z0 920 950 PComponent: KOMBI+WEGFAHRS. VDO D04Coding: 04442Shop #: WSC 00001VCID: 4BE9A5376ADDWAUZZZ8Z33N024558 AUZ7Z0B2277669No fault code found.-------------------------------------------------------------------------------Address 45: Inter. Monitor Labels: 8E0-951-177.LBLController: 8Z0 951 177Component: Innenraumueberw. D04Coding: 00001Shop #: WSC 00000VCID: 55DD434FBC19No fault code foun
Click to expand...
No fault codes but an EML 🤔
 
james.mckenzie said:
Sorry, missed this one. Where is the EML in the scan report? Did i overlook something? The car has had EML light on and off in the past but the last owner has done all the due diligence he says. The scan file is the proof.
Click to expand...
Nah all is well then, it sounded like there was an intermittent engine light showing up, which (unless someone had cleared the codes before you scanned) should leave a residual code(s). But if you were referring to old problems, that have since been resolved, and the codes subsequently cleared then the scan is as it should be
 
james.mckenzie said:
Does anyone know of this car? @A2Steve @timmus @Ami
Click to expand...
Hi James,

Whilst I remember almost all A2 owners that I’ve ever met, I don’t remember all the cars, nor do I have a complete record of those I’ve seen/touched.
In the words of Manuel from Fawlty Towers, “I know nothing”.

Cheers,

Tom
 
james.mckenzie said:
I think a test drive is in order with a scan afterwards to flag any further issues. Thanks for your help
Click to expand...
That is definitely the way to go.
FSIs are meant to be driven enthusiastically. If the vendor isn't willing to "give it some welly" over 4,000 rpm in 3rd is a good test, then think carefully before you do.
Good luck.
Mac.
 
Indi said:
Nah all is well then, it sounded like there was an intermittent engine light showing up, which (unless someone had cleared the codes before you scanned) should leave a residual code(s). But if you were referring to old problems, that have since been resolved, and the codes subsequently cleared then the scan is as it should be
Click to expand...
It's not difficult to get a clean scan on a less than clean engine. Clear codes, don't start the engine, then scan. Look Mum, No Faults.
Mac
 
james.mckenzie said:
Cheers Tom. If all goes well I might need to capitalise on your trip down south for some works if that's ok? When are you down next?
Click to expand...
I owe @Proghound a message about this very topic.
I would, of course, be happy to meet when I’m next ‘down south’. It is my intention to organise such a trip as soon as I am physically able to do the work, but my recovery from knee surgery is taking longer than expected, meaning no precise dates can yet be set.

I am now able to ride a static bike without any applied resistance for about 20 minutes, and am able to comfortably walk about 500 metres …but going down stairs or squatting next to an A2: absolutely not!

Hopefully I’ll be close to 100% by midsummer. 🤞🏻

Cheers,

Tom
 
timmus said:
I owe @Proghound a message about this very topic.
I would, of course, be happy to meet when I’m next ‘down south’. It is my intention to organise such a trip as soon as I am physically able to do the work, but my recovery from knee surgery is taking longer than expected, meaning no precise dates can yet be set.

I am now able to ride a static bike without any applied resistance for about 20 minutes, and am able to comfortably walk about 500 metres …but going down stairs or squatting next to an A2: absolutely not!

Hopefully I’ll be close to 100% by midsummer. 🤞🏻

Cheers,

Tom
Click to expand...
Tom, I'm sorry to hear your recovery has slowed from its initial promise. I hope that isn't going to curtail your planned mountaineering exploits this year ... although the Ultras will all still be there next year of course. At least it sounds like you're still making progress. I've got all summer to be able to host your next residency, whenever you're ready :)
 
You must log in or register to reply here.
Back
Top