G
Guest 4123
Guest
I have been trying all week to get my A2 through a transmission basic setting. The problem started after I had removed the starter motor to solve the starter squeal. Put the motor back and guess what, no start! Checked the starter circuit and all OK. No relevant error messages apart from those resulting from disconnections. So I assumed that the gearbox controller (which can inhibit starting if there is something amiss) was preventing starting. This means that the basic setting was lost as a result of disconnecting the battery - it shouldn't have been. This was proven by the engine starting during the second phase of the basic setting. However when it got to the "SEARCHNG" phase, it would stick with no reduction in the actuator voltage. It has been doing this all week. This morning I found an older version of VCDS, 18.9.1 and tried that. It worked first time!
I will contact Ross Tech.
RAB
I will contact Ross Tech.
RAB