Bumblebee
Member
When I bought bumblebee she had a P0302 misfire on cyl 2. I moved the coil packs around and cleaned all plugs as they were sooty.......
Took it for a spin earlier as I'd filled up with 98 and emptied some redex in too......
She ran with a slightly lumpy idle ( sitting at about 900rpm) but drove without missing like limp mode.... Pushed to 3000rpm and then as revs dropped the EML light blinked a few times then went out?? Repeated exercise and same......
Just sharing incase this is an obvious issue others have experienced-fixed, but I'm still thinking a vacuum hose / air leak know I understand more about the F.S.I cycle etc.......
TIA.....
Took it for a spin earlier as I'd filled up with 98 and emptied some redex in too......
She ran with a slightly lumpy idle ( sitting at about 900rpm) but drove without missing like limp mode.... Pushed to 3000rpm and then as revs dropped the EML light blinked a few times then went out?? Repeated exercise and same......
Just sharing incase this is an obvious issue others have experienced-fixed, but I'm still thinking a vacuum hose / air leak know I understand more about the F.S.I cycle etc.......
TIA.....
Last edited: