I have been having quite a few problems recently with oil and water leaks and the car stuttering above 2,000 rpm so i thought that i would try to run some diagnostics on it and i got these codes.
FYI, my a2 is a 1.4 2004 TDi (75).
VAG-COM Version: Release 409.1-US
Control Module Part Number: 045 906 019 AT
Component and/or Version: 1,4l R3 EDC 0000SG 1532
Software Coding: 00002
Work Shop Code: WSC 02138
Additional Info: WAUZZZ8Z64N006055 AUZ7Z0C2440809
1 Fault Found:
17671 - Pump-Jet Valve: Cylinder 2 (N241): Implausible Signal
P1263 - 35-10 - - - Intermittent
VAG-COM Version: Release 409.1-US
Control Module Part Number: 8Z0 907 379 D
Component and/or Version: ESP FRONT MK60 0101
Software Coding: 0007303
Work Shop Code: WSC 02154
1 Fault Found:
00668 - Supply Voltage Terminal 30
002 - Lower Limit Exceeded - Intermittent
VAG-COM Version: Release 409.1-US
Control Module Part Number: 8Z0 959 655 E
Component and/or Version: Airbag Front+Seite 5005
Software Coding: 00102
Work Shop Code: WSC 02152
1 Fault Found:
00588 - Airbag Igniter: Driver Side (N95)
32-10 - Resistance too High - Intermittent
Does anyone know what that could mean and how to fix them?
Thanks for all of your help.
JPA
FYI, my a2 is a 1.4 2004 TDi (75).
VAG-COM Version: Release 409.1-US
Control Module Part Number: 045 906 019 AT
Component and/or Version: 1,4l R3 EDC 0000SG 1532
Software Coding: 00002
Work Shop Code: WSC 02138
Additional Info: WAUZZZ8Z64N006055 AUZ7Z0C2440809
1 Fault Found:
17671 - Pump-Jet Valve: Cylinder 2 (N241): Implausible Signal
P1263 - 35-10 - - - Intermittent
VAG-COM Version: Release 409.1-US
Control Module Part Number: 8Z0 907 379 D
Component and/or Version: ESP FRONT MK60 0101
Software Coding: 0007303
Work Shop Code: WSC 02154
1 Fault Found:
00668 - Supply Voltage Terminal 30
002 - Lower Limit Exceeded - Intermittent
VAG-COM Version: Release 409.1-US
Control Module Part Number: 8Z0 959 655 E
Component and/or Version: Airbag Front+Seite 5005
Software Coding: 00102
Work Shop Code: WSC 02152
1 Fault Found:
00588 - Airbag Igniter: Driver Side (N95)
32-10 - Resistance too High - Intermittent
Does anyone know what that could mean and how to fix them?
Thanks for all of your help.
JPA