neilrichardson
Member
Hi - I'm having a intermittent fault code "18038 - Accelerator Position Sensor (G79): Signal too Low" which is putting the car into "limp" mode.
As a result I suspect the recently replaced throttle pedal is at fault.
The throttle body has also been replaced.
It would be useful to know what kind output readings people are getting from their throttle pedals.
In idle my throttle is registering 14.5% output and will go to a maximum of 80% output when pushed to the carpet (which in itself is odd). When the assembly is removed then the range is 14.5% and 90%.
Just odd that it's A) Starting so high... and B) only managing a max of 80%
Thanks in advance!
As a result I suspect the recently replaced throttle pedal is at fault.
The throttle body has also been replaced.
It would be useful to know what kind output readings people are getting from their throttle pedals.
In idle my throttle is registering 14.5% output and will go to a maximum of 80% output when pushed to the carpet (which in itself is odd). When the assembly is removed then the range is 14.5% and 90%.
Just odd that it's A) Starting so high... and B) only managing a max of 80%
Thanks in advance!
Last edited: