d4v1d sm4rt
A2OC Donor
Pleased to report the fittment of V6Q0411 314N (or sometimes listed as (R) cured my anti roll bar knock a treat. Just cut off the old hard plastic bushes and find a way to ensure the ARB doesnt migrate sideways, (I used 2 Koni plastic washers to abut to the new bushes and a couple of Jubilee chips on the bar itself. The part number listed has a 18.5mm hole in the centre which means you can use your existing ARB without the expence of a new £60 bar or the time consuming inconvenience of having to drop the subframe. I hope this saves you all much money and hassle. I couldnt see the point of the powerflex items as they were 7 times the price and had to be made to order (!) The car is bliss now! It took about an hour to do and was relatively easy. Got the bushes from my local VW dealer who had them in stock. I would also say that an 18.5mm bar would be more likely to be stiffer that the replacement 16mm one that is supplied for later applications also, therefore limiting roll in corners.