Hi all,
After the puzzling sensor issue was solved we now have the following fault showing intermittently -
VAG-COM Version: Release 311.2-N
Chassis Type: 8Z - Audi A2
Scan: 01,02,03,08,09,15,16,17,36,37,45,46,55,56,76
Address 01 -------------------------------------------------------
Controller: 036 906 013 F
Component: MED7.5.11 4628
Coding: 00051
Shop #: WSC 02138
WAUZZZ8Z43N012998 AUZ7Z0B2195636
1 Fault Found:
[17439 - Manifold Change-Over Valve (N136): Setpoint Not Reached
P1031 - 35-00 - -Readiness: 1000 0000
The car does seem a little down on power and we get a bit of a rattle when pulling away where you seem to have to give it some to get the required power pullingo ut of junctions etc.
Anyone got any ideas on a fix - parts required, cost!!!!! etc
cheers
Churchy
After the puzzling sensor issue was solved we now have the following fault showing intermittently -
VAG-COM Version: Release 311.2-N
Chassis Type: 8Z - Audi A2
Scan: 01,02,03,08,09,15,16,17,36,37,45,46,55,56,76
Address 01 -------------------------------------------------------
Controller: 036 906 013 F
Component: MED7.5.11 4628
Coding: 00051
Shop #: WSC 02138
WAUZZZ8Z43N012998 AUZ7Z0B2195636
1 Fault Found:
[17439 - Manifold Change-Over Valve (N136): Setpoint Not Reached
P1031 - 35-00 - -Readiness: 1000 0000
The car does seem a little down on power and we get a bit of a rattle when pulling away where you seem to have to give it some to get the required power pullingo ut of junctions etc.
Anyone got any ideas on a fix - parts required, cost!!!!! etc
cheers
Churchy