craigyb
A2OC Donor
Ok, well some good news, when I was trying to get my reverse camera to work I had to buy an older rev B RNS-E PU unit to code for camera. All was working well with the camera, cangate, speed pulses coded as A4.
So after some discussions on other forums it seems that you can code these rev B units to A6 mode and allow them to use the speed pulse that the A2 provides.
So I can confirm you can install an RNS-E PU MY2010 unit into an A2 as long as it is a rev B or HW02, you can check the HW level from the CAR button.
The unit must be at SW0150 to allow coding to A6 mode and after that it can be upgraded to later software such as 0200 (2012) and 0220 (2013)
Strange thing is that now I have removed my cangate and coded to A6 to test my reverse camera has stopped working.
So after some discussions on other forums it seems that you can code these rev B units to A6 mode and allow them to use the speed pulse that the A2 provides.
So I can confirm you can install an RNS-E PU MY2010 unit into an A2 as long as it is a rev B or HW02, you can check the HW level from the CAR button.
The unit must be at SW0150 to allow coding to A6 mode and after that it can be upgraded to later software such as 0200 (2012) and 0220 (2013)
Strange thing is that now I have removed my cangate and coded to A6 to test my reverse camera has stopped working.