rosiedog A2OC Donor 15 May 2017 #1 How do you remove the cubby hole and aircon controls on a single din dash please.? Just don't want to break anything. Thanks in advance for any help.
How do you remove the cubby hole and aircon controls on a single din dash please.? Just don't want to break anything. Thanks in advance for any help.
a2sumo A2OC Donor 15 May 2017 #2 Hi its tight but if you place your hand inside and make a fist --then pull it will un clip itself. Warning it is tight. cheers mike
Hi its tight but if you place your hand inside and make a fist --then pull it will un clip itself. Warning it is tight. cheers mike
vespa166 A2OC Donor 15 May 2017 #3 http://www.a2oc.net/forum/showthread.php?t=20698 Hth. Sent from my E6553 using Tapatalk
Birchall Dick Chown Award 2016 15 May 2017 #4 Remember to open the ashtray before you pull the cubby hole out!!!!! once it is out you can reach in and push the climate panel out by pushing on the plugs you can just feel at the back of the climate panel. Steve B
Remember to open the ashtray before you pull the cubby hole out!!!!! once it is out you can reach in and push the climate panel out by pushing on the plugs you can just feel at the back of the climate panel. Steve B