Indicator mod?
- Thread starter dan_b
- Start date
driveforward
Member
Any news mate?
Jörgen
Member
Yes, checked it with Cum-cartec and got confirmed that;
http://www.cum-cartec.de/index.html...audi_a2_komfortblinker_nachruestsatz4753.html
definitely works on an A2.
He didn't confirm about the 10-pins though, if you decide to order you better double check this with him.
Still didn't order one for myself, apart from €45,- for the blinker you also pay nearly €20,- for P&P and a paypall fee. I got doubts if that's worth it...
http://www.cum-cartec.de/index.html...audi_a2_komfortblinker_nachruestsatz4753.html
definitely works on an A2.
He didn't confirm about the 10-pins though, if you decide to order you better double check this with him.
Still didn't order one for myself, apart from €45,- for the blinker you also pay nearly €20,- for P&P and a paypall fee. I got doubts if that's worth it...
L
LtDo
Guest
Hello everyone,
I just bought a "komfortblinker adaptator" from ebay and it looks like the part 000 971 123 (see http://www.passatplus.de/umbauten/blinker/000971123.jpg).
The type of connector it is is like the one you can better see on the top right corner of this picture http://www.kunset.de/images/kabelkomfortblinkerrelais.jpg
You can see the various possible items on :http://www.passatplus.de/umbauten/blinker/index.htm
I asked how to install it and this is their answer:
"Hallo!
Brewing Blue line (6): Mass
White Head (8) to pin 3
Head rind (4) terminal 15 (ignition Plus)
Yellow gray line (2) to pin 5
Grey Management (5) to pin 7
Now just to relay the relay makers stuck and ready.
The relay has the following part number 000 953 227 A"
As you can see, my part has a big connector more square than rectangle (like these shown by Jörgen). Do you think it will work on my A2 or not and if well, how?
I just bought a "komfortblinker adaptator" from ebay and it looks like the part 000 971 123 (see http://www.passatplus.de/umbauten/blinker/000971123.jpg).
The type of connector it is is like the one you can better see on the top right corner of this picture http://www.kunset.de/images/kabelkomfortblinkerrelais.jpg
You can see the various possible items on :http://www.passatplus.de/umbauten/blinker/index.htm
I asked how to install it and this is their answer:
"Hallo!
Brewing Blue line (6): Mass
White Head (8) to pin 3
Head rind (4) terminal 15 (ignition Plus)
Yellow gray line (2) to pin 5
Grey Management (5) to pin 7
Now just to relay the relay makers stuck and ready.
The relay has the following part number 000 953 227 A"
As you can see, my part has a big connector more square than rectangle (like these shown by Jörgen). Do you think it will work on my A2 or not and if well, how?
fbi
Member
mine didn't look like this...
It is a loom with "custom" connectors on both sides. (i.e. it hasn't separate wires)
All I had to do was unplug the indicator relay from its holder and plug it onto the relay holder of the "komfortblinker kit" loom, and then plug the connector of the "komfortblinker kit" loom to that indicator relay holder.
It is a loom with "custom" connectors on both sides. (i.e. it hasn't separate wires)
All I had to do was unplug the indicator relay from its holder and plug it onto the relay holder of the "komfortblinker kit" loom, and then plug the connector of the "komfortblinker kit" loom to that indicator relay holder.