.... Led lights .... Led lights .... Led lights ;)

S

Sarge

A2OC Donor
Hi and thanks guys, I have had a lot of interest in the LED's that I fitted on my car, thanks to all for your enquiries. I thought I would put up some pics of what they are, with more info to follow.
I have 'white' and 'red' ones, other colours are available, I know some people using 'ice blue' without any problems.
These are waterproof, 12v DC, draw very little power, so can be plugged in anywhere on the car.
Some of them come with double sided tape on the back so they can simply be peeled and stuck on anywhere.

Please register your interest/confirmation as I will place an order together.


By the way thanks for the PM's ;)


Regards
SARGE


Price list for Elitemultimedia - SARGE-

ITEM NO. TYPE UNIT COLOR UNIT PRICE
1001 MOS-24LED/24CM PCS WHITE £4.99
1002 MOS‐48LED/48CM PCS WHITE £7.99
1003 MOS‐72LED/72CM PCS WHITE £11.99
1004 MOS‐96LED/96CM PCS WHITE £15.99
1005 MOS‐120LED/120CM PCS WHITE £19.99


ITEM NO. TYPE UNIT COLOR UNIT PRICE
2001 MOS‐24LED/24CM PCS BLUE £3.99
2002 MOS‐48LED/48CM PCS BLUE £6.99
2003 MOS‐72LED/72CM PCS BLUE £9.99
2004 MOS‐96LED/96CM PCS BLUE £13.99
2005 MOS‐120LED120CM PCS BLUE £16.99

ITEM NO. TYPE UNIT COLOR UNIT PRICE
3001 MOS‐24LED/24CM PCS GREEN £3.99
3002 MOS‐48LED/48CM PCS GREEN £7.99
3003 MOS‐72LED/72CM PCS GREEN £11.99
3004 MOS‐96LED/96CM PCS GREEN £15.99
3005 MOS‐120LED/120CM PCS GREEN £18.99

ITEM NO. TYPE UNIT COLOR UNIT PRICE
4001 MOS‐24LED/24CM PCS YELLOW £2.99
4002 MOS‐48LED/48CM PCS YELLOW £4.99
4003 MOS‐72LED/72CM PCS YELLOW £7.99
4004 MOS‐96LED/96CM PCS YELLOW £9.99
4005 MOS‐120LED120CM PCS YELLOW £12.99

ITEM NO. TYPE UNIT COLOR UNIT PRICE
5001 MOS‐24LED/24CM PCS RED £2.99
5002 MOS‐48LED/48CM PCS RED £4.99
5003 MOS‐72LED/72CM PCS RED £7.99
5004 MOS‐96LED/96CM PCS RED £9.99
5005 MOS‐120LED/120CM PCS RED £12.99

ITEM NO. TYPE UNIT COLOR UNIT PRICE
6001 MOS‐24LED/24CM PCS R G B £4.99
6002 MOS‐48LED/48CM PCS R G B £9.99
6003 MOS‐72LED/72CM PCS R G B £13.99
6004 MOS‐96LED/96CM PCS R G B £18.99
6005 MOS‐120LED/120CM PCS R G B £22.99

ITEM NO. TYPE UNIT COLOR UNIT PRICE
7001 SMD5050/28cmM PCS Red £15.99
7002 SMD5050/28cm PCS Yellow £15.99
7003 SMD5050/28cm PCS Blue £16.99
7004 SMD5050/28cm PCS Green £16.99
7005 SMD5050/28cm PCS White (sharp) £17.99
7006 SMD5050/28cm PCS White(soft) £18.99
7009 SMD5050/28cm PCS R G B £18.99



All listings are per unit (1 piece)
Prices +P&P. Pricing in UK Pounds
Prices subject to change without prior notice
* Discounts for same time purchase of a pair or more
 
Last edited by a moderator:
How to remove Headlights Lens?

Hey Sarge

Do you have a picture of the clip on headlights?
I had a look at headlights today and there seems to be two clips
one on top and one at bottom, removed both clips but still
having problems taking the lens apart.:mad:

Cheers,

A2sport
 
A2SPORT said:
Hey Sarge

Do you have a picture of the clip on headlights?
I had a look at headlights today and there seems to be two clips
one on top and one at bottom, removed both clips but still
having problems taking the lens apart.:mad:

Cheers,

A2sport
Click to expand...

That'll be a glued shut headlight. The 'glued shut' lights I recently re-worked had one clip on top and one on the bottom. I spotted on some earlier (clipped) lights several clips all the way around the headlight.
 
As far as I can recall, there is about 6 clips on each light, these have to be removed very carefully, and lift them from the black housing side and not the lens side.


:) SARGE
 
A2SPORT said:
Can someone please give me a step by step guide?:confused:
I don't know where to start:p

Cheers,

A2sport
Click to expand...

What is it you need to know mate? To remove the lights you will need to remove 2 bolts holding them in, one on top, and other behind where the grill would be after the bonnet is removed. Then disconnect the wiring plug, and lift out the headlights. I advise to give them a good clean before opening them up as dirt will fly around when you open them, and can get inside. Remove the clips lifting them up from the casing side and not the lens side, this is so not to cause stress on the the flimsy bits of plastic on the lens side, as they can break.
You should have about 6 clips, after removing these the light just comes apart.
As for the glued type, I'm sorry I haven't seen these as yet, and you will need to improvise.

Hope it helps mate.

SARGE
 
Last edited by a moderator:
The process is the same for the glued type lights, except there are only two clips and the lights won't come apart without serious modification (i.e. you have to cut away a small section of the casing to cut the glue). It can be done but it takes a while...and it hurts your hands.
 
Thank's Lads I'll give it a go this weekend, One more thing Keith how much of the plastic casing would i need to remove? ("",cm,mm):D

Cheers,

A2sport
 
You have to remove about a cm all the way around the edge of the casing. It's clearly defined as it is the square lip that encapsulates the edge of the lens. Once you have trimmed this part off you can get a knife between the lens and the casing. I would suggest you heat the light up with a hot air gun/bath/oven first as the plastic is really tough/stiff. Once its nice and warm it'll be fairly easy to cut (use a new Stanley knife blade, and watch your fingers).

Good luck.:)
 
looks a great Idea,
How about the same with indicator orange and running off them in between so it looks like the newer models?
 
Keithb said:
You have to remove about a cm all the way around the edge of the casing. It's clearly defined as it is the square lip that encapsulates the edge of the lens. Once you have trimmed this part off you can get a knife between the lens and the casing. I would suggest you heat the light up with a hot air gun/bath/oven first as the plastic is really tough/stiff. Once its nice and warm it'll be fairly easy to cut (use a new Stanley knife blade, and watch your fingers).

Good luck.:)
Click to expand...

Thanks Keith
 
I HIGHLY ADVISE that you obtain a spare set of clusters before you start heating/cutting/prising your existing light clusters apart.

YOU HAVE BEEN WARNED.
 
leds

hi mate, thanks for the other reply re; the front fog, had a look but it had gone.

these leds you have look ok, thing is would like some but dont want a tacky look if you know what i mean?

Where did you get yours from? and how much if you dont me asking. have seen some on ebay, but unsure on that one.

thanks

andrew007007
 
You must log in or register to reply here.
Back
Top