bretti_kivi
Member
disconnect the battery
wait for 10 minutes at least
Raise the seat so the back is almost vertical.
Take the covers off the rear of the seat runners; there are two per side.
You'll need a multistar 12 (I think, I will check). There are four bolts holding the seat in place; two at the rear (under the covers) and two at the front into the crossmember.
Disconnect the cables from underneath before trying to remove the seats!
It is really, really easy.
Don't be tempted if you're putting soundproofing in to put it on top of the crossmember: if you do, the seat won't fit back in.
Bret
wait for 10 minutes at least
Raise the seat so the back is almost vertical.
Take the covers off the rear of the seat runners; there are two per side.
You'll need a multistar 12 (I think, I will check). There are four bolts holding the seat in place; two at the rear (under the covers) and two at the front into the crossmember.
Disconnect the cables from underneath before trying to remove the seats!
It is really, really easy.
Don't be tempted if you're putting soundproofing in to put it on top of the crossmember: if you do, the seat won't fit back in.
Bret