TDI 75 Valve clearances & Injector removal

[steveb]

It looks like i need to remove the injectors on a tdi 75 as the valve forms part of this is there a gap that needs to be set, also i presume the injector comes out when you remover the rocker shaft above it and the small clamp to the side ? anyone have a link to how to do it ? i did try a search but only came up with EGR valve posts

Thanks

Steve

 

[Mustang-owner]

Hi Steve,

Not sure if you're doing this on your 2001 AMF, but the below PDF's should help if you are.

Cheers

Jeff

 

[steveb]

thanks it is on an AMF but not that one

 

[spike]

thanks it is on an AMF but not that one

Your original post was headed 'valve clearances' but as the tappets are hydraulic, no shimming required. If you remove the camshaft then you will have to set the injector rocker lever clearances as shown in Jeff's pdf files
Apologies if I have mis-read your question

Chears Spike

 

[steveb]

Not having seen the set up before i wasn't sure what the adjustment was for, valve clearance or for the injectors, now clear from Jeffs files. Best look for the DTI.