At the top of VCDS output when I scan my engine module there is always the rather disconcerting message 'Redir Fail!', like this
Address 01: Engine Labels: Redir Fail!
Part No: 036 906 013 F
Component: MED7.5.11 5130
Coding: 00051
Shop #: WSC 02138
VCID: 122BEA385E4E8BD14F-5140
WAUZZZ8Z65N000662 AUZ7Z0D2613505
As a relative VCDS novice I have no idea what this means and I am guessing something is not configured correctly, but it is not right and I want to fix it.
I have not been too worried as a simple forum search 'Redir Fail!' Illustrates that the majority of VCDS output put up on posts on here contains this error string! On briefly digging a little a few comments from memory appear, 'doesn't matter', 'means it's a bit slower scanning', 'still reports fault codes', 'may effect measuring blocks' ..
Can someone explain in very simple terms about this and how to fix it.
Thanks - Andy
Address 01: Engine Labels: Redir Fail!
Part No: 036 906 013 F
Component: MED7.5.11 5130
Coding: 00051
Shop #: WSC 02138
VCID: 122BEA385E4E8BD14F-5140
WAUZZZ8Z65N000662 AUZ7Z0D2613505
As a relative VCDS novice I have no idea what this means and I am guessing something is not configured correctly, but it is not right and I want to fix it.
I have not been too worried as a simple forum search 'Redir Fail!' Illustrates that the majority of VCDS output put up on posts on here contains this error string! On briefly digging a little a few comments from memory appear, 'doesn't matter', 'means it's a bit slower scanning', 'still reports fault codes', 'may effect measuring blocks' ..
Can someone explain in very simple terms about this and how to fix it.
Thanks - Andy