Please HELP !! Car not starting...ANY Ideas, comments welcome..

A neighbours polo had a similar problem, i scanned it and it came up with dash and immobilizer faults, it would start and stall straight away. I removed the dash checked connections etc. no change. he got the RAC out the chap gave the dash a good thump, the car started, he suggested a poor connection in the dashboard circuit board.
 
This is the aux power on the positive terminal. You can see the connections and the fuse is marked...

1708815438473.jpeg
 
A neighbours polo had a similar problem, i scanned it and it came up with dash and immobilizer faults, it would start and stall straight away. I removed the dash checked connections etc. no change. he got the RAC out the chap gave the dash a good thump, the car started, he suggested a poor connection in the dashboard circuit board.
It definitly needs a Good FUMP :mad:
 
And the Winner is.... @steveb (and the RAC chappy) !! πŸ‘πŸ‘

Really, you ask.. YES REALLY !! :confused:

Tried ALL things suggested, with no joy and (probably out of frustration 😠) gave the clock pod a good slap, which set the alarm beeping,
disconected battery a couple of times until beeping had stopped and lo an' behold car started.

I'm hoping this was just a 1 off glitch, alarm immobaliser got a bit confused, etc..

Thank you all who contributed here ☺️, I guess I will just have to 'see how it goes'.

Thank You.
 
And the Winner is.... @steveb (and the RAC chappy) !! πŸ‘πŸ‘

Really, you ask.. YES REALLY !! :confused:

Tried ALL things suggested, with no joy and (probably out of frustration 😠) gave the clock pod a good slap, which set the alarm beeping,
disconected battery a couple of times until beeping had stopped and lo an' behold car started.

I'm hoping this was just a 1 off glitch, alarm immobaliser got a bit confused, etc..

Thank you all who contributed here ☺️, I guess I will just have to 'see how it goes'.

Thank You.
I'd start looking for a replacement cluster. And get it configured for a swap, or remove yours, and send it to @timmus for a refurb.
Dodgy solder joints don't get less dodgy with time.
Take advantage of your lucky reprieve, your luck may not last, and the next failure may not be on your home driveway.
Mac.
 
I'd start looking for a replacement cluster. And get it configured for a swap, or remove yours, and send it to @timmus for a refurb.
Dodgy solder joints don't get less dodgy with time.
Take advantage of your lucky reprieve, your luck may not last, and the next failure may not be on your home driveway.
Mac.
I would like nothing more than for @timmus to come to my house to refurb my clocks. O, and maybe fit a colour DIS too, O, and my 4spoke multifunction steering wheel/control box, and cruise stalk... ;)
 
I would like nothing more than for @timmus to come to my house to refurb my clocks. O, and maybe fit a colour DIS too, O, and my 4spoke multifunction steering wheel/control box, and cruise stalk... ;)
Ask him nicely, and he may be able to get an exchange refurbed cluster delivered to you ...
Mac.
 
Please HELP !! Car not starting...ANY Ideas, comments welcome..

Hi All,

My car (fsi) is not starting, when I turn ignition on only 3 lights come on...
View attachment 119757

Then after a second or 2 ....
View attachment 119758


Turn key, car starts for half second then cuts out.



VCDS Scan results...
View attachment 119759

Any and All Ideas, comments, experiences, would be much appreciated, to try point me in right direction to fix!

Thanks in advance,

Rob.
That happened to me about two weeks ago. Mine is a tdi, I lifted the panel under the passenger footwell and checked all the connections and then used a hairdryer to blow warm air into it for some minutes- amazingly it sorted the problem!!??
 
Thanks for all the recommendations, folks.

I am, of course, happy to resolve this issue for good.

The usual mantra applies: I try to be better than Audi dealerships and cheaper than your local garage.

Let me know if/how you’d like to proceed via private message.

All the best,

Tom
 
Back
Top