So today I..,
Started prepping the key parts for Basil well overdue suspension rebuild , and 312 mm brake upgrade
So , managed to obtain the right hub and wheel bearing , fitted the wheel bearing into the hub and give the assembly a couple of coats of black paint
For the consuls , got a local chap to press out end old TCA Rear bush , and press in new ones , the old bushes looking to be very good , but if your going to do the job , do it right !
Cleaned up the consuls , and applied a lick of paint , plus 2 coats of clear lacquer, after careful masking off all the bolt , and mounting faces
Very please with my steps so far , Basil is gong to look nice and clean on the underside as he heads for 200k..