cheechy
A2OC Donor
Spent today removing a no name dab and replacing with a pure highway 600. Whilst the old one was connected to a glass mount aerial I was forced to move to front wire stick on due to pure properitary plug system. I also enquired about adapters to take to the glass mount but nothing available.
Anyways irrelevant I thought. Reviews good and I tested before all fitting in place. I was getting 5 to 6 bars with 100% quality on all stations.
Installed into my connects under the cover in front of the gearstick as before. System is that power is via usb, with 3.5mm cable from the pure unit into a a/b switch, then into a interference reduction unit, to connects2 unit then into the head unit.
Reception now awful. I suspect interference has been introduced somewhere. Testing was without a/ b switch but also no engine all be it I tested without engine on in the same location as before and it’s much worse.
Anything to suggest to reduce interference or should I look to jimmy rig the glass aerial into the setup?
Mighty frustrating this...if anything after ripping out the old unit I now have worse reception
Cheers
Anyways irrelevant I thought. Reviews good and I tested before all fitting in place. I was getting 5 to 6 bars with 100% quality on all stations.
Installed into my connects under the cover in front of the gearstick as before. System is that power is via usb, with 3.5mm cable from the pure unit into a a/b switch, then into a interference reduction unit, to connects2 unit then into the head unit.
Reception now awful. I suspect interference has been introduced somewhere. Testing was without a/ b switch but also no engine all be it I tested without engine on in the same location as before and it’s much worse.
Anything to suggest to reduce interference or should I look to jimmy rig the glass aerial into the setup?
Mighty frustrating this...if anything after ripping out the old unit I now have worse reception
Cheers