If its a 90 surely it's a atl?Hi all can anybody help me i need left and right engine mounts for 1.4 diesel 90 amf. Is there any compatible parts off a polo or any other car I could use, your help would be much appreciated, cheers Jon
hi Charles got part number off audi parts who said amf, i don't know what engine it was before they said that, how can I check,If its a 90 surely it's a atl?
There is usually a label on the belts end of the engine that has a bar code and the engine code (AMF, BHC, ATL etc.) on it ; likewise this will also be printed on your car's build sticker of which one copy is in the battery well, and the other inside the cover of the logbook.hi Charles got part number off audi parts who said amf, i don't know what engine it was before they said that, how can I check,
Tdi 90 also have rear disk brakes which is one of the easiest ways to tell, unless it's had a axle swapThere is usually a label on the belts end of the engine that has a bar code and the engine code (AMF, BHC, ATL etc.) on it ; likewise this will also be printed on your car's build sticker of which one copy is in the battery well, and the other inside the cover of the logbook.
If it is a 90 there will be a red i on the rear, you have a DMF, and the air return pipe from the intercooler has a pressure sensor plumbed into it.
If it is an AMF, there will probably be a Webasto heat pump, silver i on rear, no sensor in the air return pipe.
Engine mounts for AMF are on this diagram :
mounting parts for engine and transmission Audi A2 (A2) 2003 year Audi EUROPA 199010
mounting parts for engine and transmission Audi A2 (A2) 2003 year Audi EUROPA 199010 spare partsaudi.7zap.com
Engine mounts for ATL are on the following :
Mounting parts for engine and transmission Audi A2 (A2) 2003 year Audi EUROPA 199030
mounting parts for engine and transmission Audi A2 (A2) 2003 year Audi EUROPA 199030 spare partsaudi.7zap.com
Onto what car model? Amf or atl?I changed both engine and gearbox mountings with the ones of a VW POLO 9N 1.9tdi 130bhp. Gearbox fits without problems. Engine mount has a welded piece added to the base in the same thickness as original. Bolts right up.
Credit to my buddy Menno.
These are what I’ve used.
That's very helpful if its for atlI changed both engine and gearbox mountings with the ones of a VW POLO 9N 1.9tdi 130bhp. Gearbox fits without problems. Engine mount has a welded piece added to the base in the same thickness as original. Bolts right up.
Credit to my buddy Menno.
These are what I’ve used.
I’m sorry, yes this is for an ATLOnto what car model? Amf or atl?
That sounds like a thread is needed to explain exactly how to replicate - you’d be doing a service to this forum / us TDi90 owners.I changed both engine and gearbox mountings with the ones of a VW POLO 9N 1.9tdi 130bhp. Gearbox fits without problems. Engine mount has a welded piece added to the base in the same thickness as original. Bolts right up.
Credit to my buddy Menno.
These are what I’ve used.