D
Deleted member 20348
Guest
Hi,
Could someone please assist with the following?
There was only one key included with the red 1.4 BBY vehicle (equipped with the AF CCCU) .
Despite the fact that both of the fobs I purchased have circuit boards installed, they are not pairing with the car via VCDS. It's possible that their frequency is off. In addition, the fobs have had key blades cut and installed along with transponders. What would be required to link the transponder with the instrument cluster and ECU and the key remote with the car?
I have the Ross-Tech Hex-V2 and full VCDS.
Thanks in advance.
Edit: had a quick check of the new fobs, I thought I had bought the keys with circuit boards in them but I didn't in the end. I must have changed my mind.
I have 2 other keys with a board in it which I have yet to try.
Could someone please assist with the following?
There was only one key included with the red 1.4 BBY vehicle (equipped with the AF CCCU) .
I have the Ross-Tech Hex-V2 and full VCDS.
Thanks in advance.
Edit: had a quick check of the new fobs, I thought I had bought the keys with circuit boards in them but I didn't in the end. I must have changed my mind.
I have 2 other keys with a board in it which I have yet to try.
Last edited by a moderator: