Skipton01
Admin Team
The Kufatec wires are intended to be fitted into the white 17-pin connector I believe - then extra wiring from the other side of the connector to the ECU is needed on all but the 1.4 petrol models.
When I do cruise fitting, I prefer to miss out this connector and go straight to the ECU, using soldered, not crimped, pins. I was always taught that a mechanical connection in a circuit was a potential weak spot, so I leave them out.
Horses for courses and all that!
Cheers,
Mike
When I do cruise fitting, I prefer to miss out this connector and go straight to the ECU, using soldered, not crimped, pins. I was always taught that a mechanical connection in a circuit was a potential weak spot, so I leave them out.
Horses for courses and all that!
Cheers,
Mike