Little Dog
A2OC Donor
That's worth knowing about thank you. Super glue your spanner to your bolt head. I'm going back out shortly to see if there is any bolt head to glue to. Looked very badly corroded yesterday.
Replaced several but never tried refitting a bearing , the snap ? ring would be a sacrificial component
Although videos show a change done on the car, always found i had to use the press
Possibly result of fine scottish road salt
OK - what about small cold chisel - create a notch then use it to hammer the head in the undoing direction.
Simon.
Good work Phil....I remember my local garage having to cut my rusty ones off. I know it's late in the day now but I had my new splash plates powder coated and they still look new after two years.
Is that for a pair , or each ?Hi,
Part numbers should be 6R0615311A and 312A and N 90305302 x6
If you need some i do them for a forum price of £28.00 posted.
Thanks
Thanks Ed, I’ll order some.They are £7 each on autodoc
Sent from my iPhone using Tapatalk
Thanks Ed, I’ll order some.
Looks like a nice job Phil, so how did you manage the old screws for coming out, I’m about to do mine.Job finished:
Stainless screws fit fine.
Looks like a nice job Phil, so how did you manage the old screws for coming out, I’m about to do mine.