Pinkythelabrat
A2OC Donor
Yes .
You put a lot into that car. I’m sure the new owner will appreciate it. I’m sure you’ll be A2ful again soon.
Sent from my iPhone using Tapatalk
Yes .
... fitted Buzz with an A1 gear knob. I like OEM though it had a sharp piece of trim that was annoying me, had similar on our FSI. I also treated Woody (my daily) to a DIS bargain from ebay. For those eagle eyed members, the current avg mpg is 25ish(car hasn't moved since install) hence the low range shown.
Fairly straight forward, 2 or 3 wires to the radio, 3 to the DIS stalk back to the grey connection on the DIS instrument cluster, earth. Otherwise, VCDS recoding /programming keys to cluster. Good info here, pdf liznik under electricity(Google translate is fantastic)...How difficult was the dis install as I’ve got this in my list of possible upgrades, resentfully purchased a full dis binnacle & stalks.
Thanks
Keith.
Eeek, just reminded me that I haven't checked the ones on my current project.
It's the only real strength keeping you in a straight line so needs to be good.
Forgot those!Well that was a pleasant surprise, someone @Jellybean ? Has at some point changed the rusty cast wishbones for the forged ones
A number of us have done that, including myself. 13 page thread here https://www.a2oc.net/community/index.php?threads/check-your-front-suspension-arms-people.31963/ Quite a few went for Lemforder cast arms but there was talk of them being discontinued. There are other makes - see the threadWell that was a pleasant surprise, someone @Jellybean ? Has at some point changed the rusty cast wishbones for the forged ones
Hi Damadgeruk,Fairly straight forward, 2 or 3 wires to the radio, 3 to the DIS stalk back to the grey connection on the DIS instrument cluster, earth. Otherwise, VCDS recoding /programming keys to cluster. Good info here, pdf liznik under electricity(Google translate is fantastic)...
Zrób to sam
// PDF Silnik Nadwozie Zawieszenie Wnętrze Układ napędowy Układ hamulcowy Klimatyzacja Felgi opony Elektryka Inne poradywww.audia2.ecom.com.pl
Do you actually mean this? - AndyWell that was a pleasant surprise, someone @Jellybean ? Has at some point changed the rusty cast wishbones for the forged ones
Chnaged it now to read pressed changed for forged one.Do you actually mean this? - Andy
Hi I have to do exactly the same job.If I may ask what was the procedure for takingToday I changed the shift tower bearing. The housing was a b****r to get out (yes, that is my blood).
I also pulled out the rod, which is rather corroded:
I’m guessing extensive water ingress has occurred at some point. The leaking washer from around the washing jet won’t help, but I also recall my mother telling me she drove the car through deep flood water a few years back.
It’s all back in situ now. The adjustment was a bit haphazard because the locking pin is broken and plastic catches have snapped off both of the bowdens. Still, it’s feeling a lot smoother (if a bit less precise because of the less than satisfactory adjustment). Next jobs are replacing the shift lever, the bowdens, the rid, sealing around the washer jet and change the gearbox oil.
Sent from my iPhone using Tapatalk
I did my gearbox oil last week used one of these pumps from amazonToday I changed the shift tower bearing. The housing was a b****r to get out (yes, that is my blood).
I also pulled out the rod, which is rather corroded:
I’m guessing extensive water ingress has occurred at some point. The leaking washer from around the washing jet won’t help, but I also recall my mother telling me she drove the car through deep flood water a few years back.
It’s all back in situ now. The adjustment was a bit haphazard because the locking pin is broken and plastic catches have snapped off both of the bowdens. Still, it’s feeling a lot smoother (if a bit less precise because of the less than satisfactory adjustment). Next jobs are replacing the shift lever, the bowdens, the rid, sealing around the washer jet and change the gearbox oil.
Sent from my iPhone using Tapatalk
I did my gearbox oil last week used one of these pumps from amazon
laser 4385 gearbox oil pump if it’s any help keeps it clean & enables precision filling.
Keith