Project: Anti-roll-bar for the front axis. Discussion!

He ho, just 5 buyers needed before the order will be given to H&R to start the production.
So be in time, for this one time offer, including shipping from DE to UK. :cool:
 
Time is running out.

We reached 50 people today. If those 50 people paid there bills, ill place the order.

Hurry up people.
 
Im driving the rear sway bar prototype in my A2 1.4 petrol since some months now and i was very happy with this. Finally, my A2 1.6 with 160.000km has a full prototype kit for front and rear installed now. H&R installed it at the H&R headquarter to do the TÜV tests and certificates last week.

Let me say this to you guys: The understeer is reduced to a minimum, also the rolling of the entire car. The steering is direct now. No more seasicknes after driving some curves. All this with the standard S-Line dampers and springs (delivery condition).

Once youve driven it, you wouldnt like to miss it.


Remember: 54 poeple ordered 61 kits and 49 people paid their order till now. Time is running out...
 
A2-D2 said:
Dear Friends of well shaped Aluminium,

because there is nothing out on the market thats fitting in the audi a2 (only for the read axis by jabbasport, whiteline and in the near future H&R), we are trying to realize a anti roll bar for the front axis in 22mm.

I just start this thread, to evaluate the chances to get enough people together over the hole EU to kickstart this project. This project is mainly promoted in the a2-freun.de forums, but will be also promoted in the dutch forums in the next days.

It will be produced by Eibach in a batch of 25 pieces, but only if we bring 25 or more people together who will pay for. Eibach offered me a price of round about 250EUR (~206GBP) max, rather less.

If you are interested, please leave a short note in this thread and let me know what you think about.

For those of you, who can read german, please follow this link:
www.a2-freun.de/forum/showthread.php?p=1068473

A2-D2
from a2-freun.de
Click to expand...

A2-D2 said:
Im driving the rear sway bar prototype in my A2 1.4 petrol since some months now and i was very happy with this. Finally, my A2 1.6 with 160.000km has a full prototype kit for front and rear installed now. H&R installed it at the H&R headquarter to do the TÜV tests and certificates last week.

Let me say this to you guys: The understeer is reduced to a minimum, also the rolling of the entire car. The steering is direct now. No more seasicknes after driving some curves. All this with the standard S-Line dampers and springs (delivery condition).

Once youve driven it, you wouldnt like to miss it.


Remember: 54 poeple ordered 61 kits and 49 people paid their order till now. Time is running out...
Click to expand...

Have you got any photos of the rear of you car with them on to see what they look like.
Cheered Robin
 
Update:

Ill order a first tranche at H&R this or next week. Ill pay the bill immediate.

For the late ones, the collective order is open till beginning of september, but ill be in holiday between august and september, so those guys must be very quick after my holiday return...

Three guys from UK ordered 5 ARB kits till now.

Some Pictures of the prototypes for you all in the attachment.

Front 18mm vs. Front 22mm
HuR_A2_VA_Stabi_HR_33325_VA_3_02.jpg

At the german Audi A2 meeting 2014
VA_Stabi11.jpg

Rear ARB 25mm
HR_Stabi_Prototyp_01.JPG

Rear ARB build in
HR_Stabi_Prototyp_03.JPG

Some more advantages ;)
Stabikit_Vorteil_Radwechsel.jpg
 
Last edited:
The collective order is closed.

Sojah you are the last one who has not paid till now. Hurry up and check your PM and Emails.
 
The ARBs to international customers were shipped yesterday, 2014-10-04 with GLS.

Please be ready to receive it.
 
My kits arrived today - so I would like to say a big thank you for organising this with H&R and opening the offer of these to us Brits. Looking forward to getting them fitted now. Cheers Mike
 
I received a present in the post too today...

DSC03608.jpgDSC03609.jpg

The production quality and finish looks really good. Thanks to all who involved and made this possible.

regards

Andrew
 
Today i popped over to A2cars in milton keynes to adjust the fit of the rear H&R anti roll bar. The front will be fitted as soon as the dust covers arrive for the new koni FSD dampers. Many thanks Tony and Petra for the hot drinks and help adjusting the rear ARB.
robina22.JPGrobins a2.jpg
 
Parcel arrived at last only 16 days late but mostly complete.

I'm going to order stainless steel bands to replace the mild steel ones fitted in the kit as suggested on the a2.de forum,
the mild steel ones wont last a year up here if the roads get salted.
well worth reading the thread over on A2.de as there is a fitting mistake on the instructions.
 
You must log in or register to reply here.
Back
Top