A2Steve
A2OC Donor
No sneak peeks yet Steve?
No mate, much to my annoyance It's being mopped tomorrow for delivery saturday so I hope to have some then.
No sneak peeks yet Steve?
What concerns me most about this is that the TDi 75 and 90 have different pressure plate and freewheel diameters. There's around 12mm between them, so I'd assume this kit will include the smaller parts, if it'll fit in the 90, as the 90 parts will not fit into the housing of a 75.
I wonder if they're willing to reimburse two lots of labour if/when their kit is found to be unsuitable?
Hi Mike
Yes, it would be a worry but it's actually listed as being for the TDI 90 to replace the dmf setup.
Looking good can't wait to see it finished.
Steve would appreciate if you could do a wee write up on the intercooler changes if you get time, especially any work done to the interview itself to make it fit and what you've done for brackets.
Assuming the paint shop are spraying the bumpers for you as well off the car?
Intercooler pipework has been ordered and is on it's way. The difference in angle on the unit i'm using and a slightly larger bore means i'll have to do a bit of fettling with some different intercooler pipes to get it plumbed in but i'm hopeful it's going to work.
The body shop have agreed to paint the rear section of the sideskirts that they 'forgot' to do. On a plus note they have also found my doorlocks that they had misplaced so once they all arrive at the end of the week i'll be back on the road.
In all fairness to them, the car went to them stripped down so I can see how it happened.
I'm paranoid about marking the paintwork. I've chipped it twice already :-/