Search results

I have been working on a 3D printed version of the lower turbo pipe mount which is no longer available and is very often broken. The CAD model was completed with the load of an original bracket from @simufly (thanks you Simon) I trial fitted the bracket to @Stan H A2 this morning and it fitted...

Please register your interest in this thread for either or both - 1) Brackets to allow the Audi A6 (c5) armrest to be fitted into the A2 £30 2) 3D printed plastic parts to cover the arm rest 'stem' finish Ex 3D printer £40 3) 3D printed plastic parts to cover the arm rest 'stem' finish smoothed...

I've been working up some repair parts over the last few months for the A2 rear electric windows. Basically the white plastic part that the steel cable attaches to in order to lift and lower the glass fails. This part if no longer available and is specific to the electric rear windows, and as...

I have been offering a machining service for several years now to machine a 'spare' spacer to allow the ASV to be located around 30mm to 40 mm near to the passenger side. This is to allow the deeper Bosch tandem pump to clear the ASV casing. These alloy spacers have all but dried up and are now...

Today I have been contacted by Ian's son John and have is OK to post the info below. It is the best news that I have had all year. Ian as made great strides in his recovery over the lasty few weeks (after many months of near no progress), his speech is much improved and is left side movement as...

I've been working on these for some time on and off, but it became a little more critical a few months ago because the ones made by Audi have become no longer available from the main deal / TPS. The LH side still appears to be available on ebay at the moment but for how long no one knows, but...

Anyone know which fuse the reversing light is in on a 1.4 tdi 2001 model year Sent from my iPhone using Tapatalk

I think it’s about time I shared with you good people a project that I have been working on for some months on and off This all started about 3 years ago when I found my OSS to be none working, the motor was making a loud clicking noise and panels not moving. On removal and striping down the...

I’ve been sent the wrong paint for wiper arms refurbs. They sent me gloss black as against satin black I open it and applied to six wiper arms only noticing this morning when they where gloss black instead of satin black I’ve checked the code and it looks like it was my fault as I’ve ordered the...

I've been a busy boy over the last few days I bought a TDI DIS instrument cluster of @A2Steve a couple of week ago, and its been sat tawnting me since it arrived, well today was the day to get on with it. I've been having a general read up as there are a few hurdles to jump through The first...

Hi, Doea anyone know if these (8Z0 864 080) are still available new, or does anyone have one that they are willing to sell or loan me for a few days so that I can CAD it up and 3D print one I recently acquired a brand new rear cup holder in Soul but its came without any fixings. I have the CAD...

You may have noticed that Ian as not been active on the forum for the last 6 weeks or so. I made contact with Ian's partner yesterday, and have her and Ian's permission to post an update. Ian was involved in an accident on the underground in London a good few weeks ago, he was hopsitalised with...

Tonight, after some discussions through today with Andrew, I modified the Audi 'Spacer' fitted between the EGR and the ASV to allow the far superior Bosch Tandem pump to be used on the BHC / ATL engines The Bosch pump technically only fits the AMF engine, the BHC and ATL were always fitted with...

Does anyone know what the full yellow circle with two part cicles on each side on a yellow background means. Its accompanied with a single beep Once it comes on it does not clear until ignition is cycled It's come on a few times recently, when accelerating hard around a fairly tight bend (e.g...

HI, I offer numerous services to the A2OC community - 3D Printing https://www.a2oc.net/community/index.php?threads/3d-printed-parts-obsolete-or-difficult-to-get-parts.35042/ - Remanufactured Door Check Straps (on an exchange basis)...

It has been brought to my attention by a member that these clear/translucent dipstick ends are not fit for purpose It Would appear that a plastic which should have been superior to the ABS which I have been using for several years is not. It appears to be letting the oil into the layers of the...

Hi followed a silver A2 1.4 TDI five seater from Harrogate for about 15 miles, it turned left of the main road, but I can't recall where too It had Votex and was a five seater, and I think red leather from a glance has I passed it and it was turning left Looked a tidy example from the back :) I...

After many months of testing and fine tuning the installation method I am now ready to offer an Auto Dimming Rear View Mirror as a 'self fit' kit You get the Auto Dimming Mirror (I currently have grey and black available) A2 windscreen adaptor stem Trim panel (so no unsightly cable from mirror...

My OSS failed last year with a click of death, so I bought a replacement OSS from a members breaker. Its sat in the garage waiting for the stars to align when Tom and myself where available for a day to swap them over. The day in planned for this Saturday, so I thought I had better try out the...

When I got my last A2 TDI it came with a full set of Audi Rubber mats, all bar the drivers side were in mint condition, the the drivers side was worn through in two spots where the driver heal had worn the rubber through I tried long and hard to purchase a replacement drivers side front rubber...