Evening.
I have also used the same supplier for headlining fabric with great results. This is a link to their Grey offering which is a reasonable colour match to the A2s Paltinum fabric:
Car Headlining To Foam. Bonded to 2mm foam. The actual fabric appearances, textures, colours and quality of your fabric may not be as what you see on screen, the dyeing process between fabrics vary due to way the fabric has been woven, constructed or treated.
www.ebay.co.uk
Whist it’s a good match I highly recommend recovering the A and D pillars along with sun visors for a perfectly refreshed appearance. You’ll need to dismantle the sun visors but there is a helpful post here to assist:
Evening all, After my recent breakthrough on understanding how simple it was to separate the 2 halves of the A2’s Sun Visor, I thought I’d compose something for you all to follow. What’s the reasoning behind this, well you may have seen that last year I reupholstered the headlining in Project...
www.a2oc.net
Something to have at hand is some food bags half filled with water and taped up so they don't leak. Placing these water bags as weights into the dips/channels of the headlining biscuit to hold the fabric down whilst the adhesive cures is extremely helpful, certainly if you have to stretch the fabric into place as it’ll just want to lift away from the headlining biscuit.
Hope this helps a successful reupholstery.
Kind regards,
Tom